10 bad problems to be eliminated when crimping terminal wire
Crimping wiring is the technology of all harness manufacturers. As a common signal transmission electronic harness, the terminal wire is almost ubiquitous in modern electrical equipment applications. In the technical process of crimping terminal wires, xinpengbo with years of experience in cable and harness assembly, has been strict requirements of precision crimping wire skills, to ensure that all crimping terminal wires meet industry standards and customer requirements. The following are some bad problems to be eliminated when crimping terminal wire.
10 bad problems to be eliminated when crimping terminal wire
terminal
1. Insulation crimping is also required to fully support and wrap the insulation without causing any damage or damage to the insulation.
2. The insulation material enters completely and extends beyond the insulation crimp sheet.
3. Prepared wires must also be in a stable working condition - not scratched, nicked, cut or damaged.
4. The wire remains in the connector, the crimping indentation is centered, and the insulation crimping must also provide a 180 degree side.
5. Wires should not be flat, twisted, bent, twisted or deformed.
6. The insulation shall be free from any signs of pinching, pulling, abrasion, discoloration, charring or burning.
7. Broken insulation may lead to safety issues and potential hazards for the wires.
8. There are no cuts or breaks in the insulation layer.
9. The insulation material is melted into strands and the wire is not fixed by crimping.
10. Contact has obvious cracks and cracks, no wire separation.
Qingdao Sanshuo Technology Co.,LTD
Address:青岛市崂山区沙子口街道北崂社区青岛海纳线束有限公司
Telephone:0532-88818800
Email:cathy@hainr.com.cn
Good Service
Scope of services
Links ： baidu | Infor全球IPN合作伙伴 | 恩富中国 | 润数信息 |